Hello World

重置 HP switch v1910-24g 至出廠設定

1. 接上 console 線，設定值為 38400,8,1,N
2. 打開電源
3. 按 crtl+B 進入 Extended Boot menu
4. 選擇 7. Skip current system configuration
5. 選擇 0. Reboot

Starting......

Press Ctrl+D to access BASIC BOOT MENU
Press Ctrl+T to start memory test

********************************************************************************
*                                                                              *
*                   HP V1910-24G Switch BOOTROM, Version 163                   *
*                                                                              *
********************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.

Creation Date       : May  8 2013
CPU L1 Cache        : 32KB
CPU Clock Speed     : 333MHz
Memory Size         : 128MB
Flash Size          : 128MB
CPLD Version        : 002
PCB Version         : Ver.B
Mac Address         : 7848xx28E8BE

Press Ctrl-B to enter Extended Boot menu...0
BootRom password: Not required. Please press Enter to continue.

Password recovery capability is enabled.

   BOOT MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Reserved
9. Set switch startup mode
0. Reboot
Ctrl+F: Format File System
Ctrl+P: Skip Super Password
Ctrl+R: Download application to SDRAM and Run
Ctrl+Z: Access EXTEND-ASSISTANT MENU

Enter your choice(0-9): 7
The current setting will run with current configuration file when reboot.
Are you sure you want to skip current configuration file when reboot? Yes or No
(Y/N):Y
Setting...Done!

   BOOT MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Reserved
9. Set switch startup mode
0. Reboot
Ctrl+F: Format File System
Ctrl+P: Skip Super Password
Ctrl+R: Download application to SDRAM and Run
Ctrl+Z: Access EXTEND-ASSISTANT MENU

Enter your choice(0-9):
Enter your choice(0-9): 0
Starting......
Press Ctrl+D to access BASIC BOOT MENU
Press Ctrl+T to start memory test